Honeywell Thor VM3 User Manual page 205

Tasks
Tasks are listed on the left side of the screen:
•
•
•
Status
The status of the radio card is shown in the upper right hand of the screen:
Note: The radio status can only be changed when the admin is logged on. Tapping the icon has
no effect when not logged in.
The status of the network connection is above the profile list.
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Browse Nearby Wireless Networks
Roam Management
Admin Login
Radio is on.
Tapping the button turns the radio off.
Radio is off.
Tapping the button turns the radio on.
The radio has been turned off.
• Tap the radio off icon to turn the radio on.
• When the status of the radio is changing a
message may be displayed such as "Radio
has been turned on".
The radio is on but is not connected:
• If there are one or more auto profiles, none
of them are able to connect.
• If there are one or more manual profiles,
none of them have been activated.
The radio is on and is starting a connection:
• The SSID of the network is displayed below
the access point icon.
The radio has initiated a connection and is
attempting to associate with the access point:
• The SSID of the network is displayed below
the access point icon.
195