Honeywell Thor VM3 User Manual page 187

Motion Detection Action
Determine what to do when motion is detected:
•
•
•
•
Display Intensity
Displays the intensity (brightness) level of the display when the ZoomZone control
panel was opened.
Motion Detection Method
Select the motion detection method.
The Thor VM3 supports the screen blanking box to determine motion. Select the port
(COM1 or COM2) to which the blanking box is attached.
Note: By default, COM1 and COM2 ports are used by Enterprise Data Collection. To use a COM
port for screen blanking, access
Scanners > Tethered Scanner (COMx) - Enable Scanner Port to off (where COMx is
either COM1 or COM2).
Motion Timeout Settings
Screen blanking can be configured to provide delays.
•
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Display Always Active - The display does not change when motion is detected.
Display Black - The display is blacked out when motion is detected.
Display freeze - The display is frozen at the time motion is detected.
Use Zoom Area - A preconfigured zoom area is displayed when motion is detected.
Delay on Motion - Configure the delay between motion detection and screen
blanking. The default is 2 seconds.
Enterprise Settings and set Data Collection > Tethered
177