Honeywell Thor VM3 User Manual page 206

Profile List
All profiles that have been created are listed in this section. Profiles can be configured
for auto connect or manual connect and are subdivided by connection type in this list.
From the profile list, an admin can:
•
•
•
•
•
•
•
Similar features are also available by right-clicking on a profile name:
•
•
•
•
•
•
196 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Organize - Open or rename a profile
New - Create a new profile
Delete - Delete an existing profile
Activate - Make an inactive profile the active profile. The inactive profile may be either
a manual or an auto profile not currently in use.
Deactivate - When the current active profile is selected, this option deactivates that
profile. If there is an inactive auto profile, that profile may become active.
Up - If there are multiple profiles, the Up feature moves the selected profile up the list.
This feature is available for both the Auto and Manual profiles.
Down - If there are multiple profiles, the Down feature moves the selected profile
down the list. This feature is available for both the Auto and Manual profiles.
New - Create a new profile.
Open - Open the selected profile to view or edit properties.
Activate - Make an inactive profile the active profile. The inactive profile may be either
a manual or an auto profile not currently in use.
Deactivate - When the current active profile is selected, this option deactivates that
profile. If there is an inactive auto profile, that profile may become active.
Disconnect - If the selected profile is connected, this option disconnects the profile.
Rename - Use to assign a new name to the selected profile.
The radio has associated with an access point
and is attempting to authenticate:
• The SSID of the network is displayed below
the access point icon.
• This step not necessary if the network is
open (no security).
The radio has successfully connected to the
network:
• If security is enabled, the authentication
process has been completed.
• The SSID of the network is displayed below
the access point icon.
• The signal strength is also displayed below
the access point icon.