Install Sim Card(S); Equipment Required; Installation Procedure - Honeywell Thor VM3 User Manual

Install SIM Card(s)

The Thor VM3 supports two SIM cards for WWAN switching. The Thor VM3 can switch
between carriers, but the WWAN connection is lost during this switch as the first carrier
must be disconnected before the second carrier can be connected. See
Connection Manager
Note: The SIM card is not hot-swappable. After installing or removing a SIM card, the Thor VM3
must be rebooted for the change to take effect.

Equipment Required

The following equipment is user-supplied:
•
•
•

Installation Procedure

1. Shutdown the Thor VM3.
2. Remove the Thor VM3 from the
3.
4. Place the Thor VM3 face down on
5. Use a #2 Phillips bit to loosen the
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
for software configuration.
SIM card(s) for desired carrier(s)
Torquing tool capable of measuring inch pounds
#2 Phillips screwdriver bit
dock.
Disconnect UPS Battery.
a stable surface.
captive M3 screws on the access
panel with the mSATA and SIM
labels. This panel is on the right
hand side when the Thor VM3 is
face down with the top away from
the user.
VM3 WWAN
127