Honeywell Thor VM3 User Manual page 210

•
•
•
•
Note: Atheros connection settings must be enabled to use CCX. It is disabled by default.
200 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Connect automatically when this network is in range - If the profile was created as an
auto connect profile, this box is checked. If created as a manual profile, this box is
unchecked.
Connect to a more preferred network if available
Connect even if the network is not broadcasting its name (SSID) - If a network is not
broadcasting its SSID, check this box.
Enable Atheros connection settings.