Install Ram Mount; Components - Ram Mounting Kits - Honeywell Thor VM3 User Manual

Install RAM Mount

CAUTION - This device is intended to transmit RF energy. For protection against RF exposure to humans and in accor-
dance with FCC rules and Industry Canada rules, this transmitter should be installed such that a minimum separation dis-
tance of at least 20 cm (7.8 in.) is maintained between the antenna and the general population. This device is not to be
co-located with other transmitters.
Before installation begins, verify you have the applicable vehicle mounting bracket assembly components necessary, as shown
in the following figures.

Components - RAM Mounting Kits

In addition to the kits below, individual RAM mounting components are also available.
Each mounting kit contains:
RAM Ball (Size D) for back of Thor VM3 Quick Mount Smart Dock with
hardware (screws and washers) to attach RAM ball to dock
RAM Arm (Size D), length varies by kit selected
One of three mounting options:
• RAM Ball mount (Size D, may include 3 cone washers), or
• RAM Clamp mount (Size D), or
• RAM Plate mount with RAM Ball (Size D) with Hardware (cone washers
and nuts) to attach Ball to Plate
1 - 18