System Configuration - Raisecom ISCOM 1024E User Manual

www.raisecom.com
TX Miror Port (1-24,q)6
Enable/Disble TX Mirror(e/d)? e
TX Miror Port (1-24,q)

4.2.7 System configuration

Select '6. System Setup' in main menu to configure system.
Select '1' reset device
Select '2' restore to default value
Select '3' modify password, you can set a 4 bits password
Select '4' back to previous menu
4.2.8 Quit
Select '7. Exit' to quit from operation menu then login.
select a port, which output is mirrored.
whether mirror output of port
press 'q' if you do not select the port which output is mirrored.
User Manual
14