Table of Contents
Advertisement
www.raisecom.com
Select the item through numeric key on this interface.
4.2.2 PORT SETUP
Select "1" to enter the screen as following in the main manual.
1.
Modify setting
Press "m" to modify the setting including：Admin(e：open，d：close)、Auto(e：auto negotiation，d：non auto
negotiation)、speed (1：100M，0：10M)、Duplex(f：full，h：half)、flow-C(e：enable flow control，d：disable
flow control). Received bandwidth (1~7: select bandwidth, d: forbid bandwidth)、send bandwidth (1~7: select
bandwidth, d: forbid bandwidth).
For example: enable port 1, 100M/FULL flow control, no bandwidth control
User Manual
6
Advertisement
Table of Contents
Need help?
Do you have a question about the ISCOM 1024E and is the answer not in the manual?
Questions and answers