Raisecom Gazelle S3000i Series Quick Start Manual

Notice
Copyright ©2022
Raisecom
All rights reserved.
No part of this publication may be excerpted, reproduced, translated, or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in Writing from Raisecom
Technology Co., Ltd.
is the trademark of Raisecom Technology Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Overview
This document sorts out the hardware characteristics of the entire device and its components,
and provides the methods, steps and precautions for the installation of the entire device and its
components, so that the device can be quickly configured when being used for the first time.
Reading this document helps you correctly install the entire device and its components.
To avoid personal injury or device damage caused by accidents, read this document carefully
before installing the device hardware. The device installation personnel must receive strict
training and master the correct operation methods and safety matters before they can install
the device. When installing the device, observe the local safety regulations. The safety matters
described in the document are only supplementary to the local safety regulations. Raisecom is
not responsible for accidents caused by violation of general safety operation requirements or
safety standards for design, production, and use of device.
Change history
Updates between document versions are cumulative. Therefore, the latest document version
contains all updates made to previous versions.
Issue 01 (2022-10-30)
Initial commercial release