Windows Hibernation - Epson TM-T88V-DT Technical Reference Manual

Windows Hibernation

Windows can be entered into hibernate mode by pressing the power button of this product.
During hibernation, the current work contents are saved. On returning from hibernation, work can be resumed
from the previous state.
Since Windows hibernation cannot be used in the initial settings, configure according to necessity.
 This setting is effective in Windows Embedded POSReady 7.
 Conduct this setting with a user account that has administrator authority.
 When you use Windows hibernation, a system file with the same capacity as the main memory
is created.
1
Making sure that this product power is off, connect the display and keyboard.
For how to connect peripherals, see
2
Turn this product's power on and immediately press "Delete" key on the keyboard for
a prolonged time to start up the BIOS menu.
3
Operating the keyboard direction keys, select "Advanced" tab and "ACPI Settings".
4
Press "Enter" key on the keyboard. The "ACPI Settings" sub-menu is displayed.
5
Operating the keyboard direction keys, select "Enable ACPI Configuration" and press
"Enter" key.
6
Select "Enabled" and press "Enter" key.
"Enable ACPI Auto Configuration" is set to "Enabled".
7
Press "Esc" key on the keyboard to close the "ACPI Settings" sub-menu.
8
Operating the keyboard direction keys, select "Save & Exit" tab and "Save Changes
and Reset".
9
Press "Enter" key on the keyboard to display the confirmation message.
Select "Yes" and press "Enter" key.
The BIOS settings are saved and Windows is started.
10
The log-on screen is displayed. Log on to Windows.
The Windows desktop screen is displayed.
"Attaching and Setting Peripherals" on page
Chapter 3 Windows Settings
39.
65
3