Connector Cover
Attaching the Connector Cover
The connector cover can be attached to protect cables that are connected to this product.
When attaching the connector cover, always hold both sides. Otherwise the connector cover
could break.
CAUTION
Attach the connector cover by the following procedure.
1
When attaching the customer display (optional) to this product, remove the U-
shaped component from the connector cover.
2
Align the hooks on the connector cover with the dents on the main body.
3
Push the connector cover to click onto the main body.
4
Make sure the cables are not pinched.
Chapter 2 Printer Functions and Settings
2
49