Network Settings
Connect to Wired LAN
LAN Cable Connections
CAUTION
Push the 10BASE-T/100BASE-TX LAN cable into the LAN connector until you hear a click.
Network Settings
Set the IP address and other network settings. Settings can be made as follows.
Setting on Windows
Perform the same settings as with the Windows PC.
Setting on EPSON TMNet WebConfig (
When LAN cables are installed outdoors, make sure devices without proper surge protection
are cushioned by being connected through devices that do have surge protection.
Otherwise, the devices can be damaged by lightning.
Never attempt to connect the customer display cable, drawer kick-out cable, or a telephone
line cable to the Ethernet connector.
page 112
Chapter 2 Printer Functions and Settings
)
2
45