Windows Recovery - Epson TM-T88V-DT Technical Reference Manual

Windows Recovery

Follow the steps below to perform the recovery and Windows initial setting.
When the recovery procedure is performed, all data will be deleted. Back up any necessary data
before performing the procedure.
 Recovery requires about 40 minutes.
 A DVD drive with USB interface is required in order to perform Windows recovery.
1
Making sure that this product power is off, connect the display, keyboard, mouse,
and DVD drive.
For how to connect peripherals, see
2
Insert the recovery disk into the DVD drive.
3
Turn on the product, and "Press any key to boot from CD or DVD" is displayed. Press
any key.
4
The system starts using the recovery disk. When a message that says "Do you want to
recover?" is displayed. Click [Yes].
5
A confirmation message that says "All data on disc will be deleted. Do you really want
to start recovery?" is displayed. Click [Yes].
Recovery is performed.
After the recovery procedure, the system automatically shuts down. 
6
The system automatically restarts several times for Windows initialization.
Do not enter any information until the Windows log-in screen appears.
7
When the log-on screen is displayed, enter the password.
The initial user name is "EPSON-USER", and the initial password is "T88V-DT".
8
Select [Start]-[Control Panel]-[Date and Time], and the [Date and Time menu] is dis-
played. Set the date, time, and time zone.
9
Turn off the product. Then remove the display, keyboard, mouse, and DVD drive.
"Attaching and Setting Peripherals" on page
Chapter 3 Windows Settings
39.
71
3