Settings - Admin Settings - Maintenance - Deployment; Settings - Admin Settings - Admin Information - Admin Information - Epson TM-T88V-DT Technical Reference Manual

Settings - Admin settings - Maintenance - Deployment

Sets the deployment for downloading and updating the TM-DT software, etc. setting files from the HTTP
server.
This can be used in TM-DT software Ver.3.0 or later.
Item
ID
Password
URL
Parameter
Server authentication
Use deployment upon system start
Apply
After applying settings, start deployment 
immediately

Settings - Admin settings - Admin information - Admin information

Sets the administrator information for TM-DT Software.
Item
Administrator name
Installation location
Apply
Chapter 4 System Development Using TM-DT Software
Description
Sets the ID for identifying this product on the Web server side. This ID
becomes the user ID used in Digest authentication.
The set value is also passed as the ID parameter value of the form data to
be posted to the server.
Sets the password used in Digest authentication.
Specify the Web server URL and path to the application.
Ex: Specify http://[Web server's IP address]/[Setting file name], then click
[Access test] to confirm that access is possible.
Specifies the user specified information that is passed to the HTTP server.
Sets whether or not to conduct server authentication based on the regis-
tered certificate when conducting access by https.
Sets whether or not to conduct deployment when starting this product.
Save the deployment settings to this product.
After saving the deployment settings to this product, execute deploy-
ment.
Description
Set the administrator name.
Set the installation location.
Registers the settings to this product.
4
125