Connect To Wireless Lan - Epson TM-T88V-DT Technical Reference Manual

Connect to Wireless LAN

You can use the optional wireless LAN cable set (OT-WL01) to connect this product to a wireless LAN.
Wireless LAN Cable Set Connections
Connect the wireless LAN cable set to a USB connector.
Connect the wireless LAN cable set by the following procedure.
1
Attach the included rubber cover to the connector of the USB extension cable into
which the wireless LAN unit will be inserted, to prevent the unit from coming off.
2
Insert the wireless LAN unit into the connector of the cable.
Adjust the position of the rubber cover so that the description on the label on the back side of
the wireless LAN unit is not covered.
3
Connect the USB extension cable to the USB connector of the printer.
If you want to fix the wireless LAN unit, cut the included affixing tape to fit and put on the unit,
and fix the unit in a place with good communication.
Chapter 2 Printer Functions and Settings
2
46