Epson TM-T88V-DT Technical Reference Manual page 80

When spooler is disabled or TM-DT Software Ver.2.6 or earlier
1: Printing success
TM-DT Software Ver.2.6 or earlier:
TM-DT Software Ver.3.0 or later:
2: Printing failed
TM-DT Software Ver.2.6 or earlier: Settings[Print result = false, Error code = Printer status]
TM-DT Software Ver.3.0 or later:
When spooler is enabled
3: The remaining free space in the spooler and the size of the print data is checked, and the product determines
whether or not the print data can be spooled.
4: If the print data cannot be spooled, the print data is cleared. [JobID, Print result = false, Error code =
EX_SPOOLER (spooler stopped)] is returned to the application. This data is not stored in the product's
spooler or the log storage area.
5: When print data can be spooled, [JobID, Print result = true] is stored in the spooler. [JobID, Print result =
true] is also returned to the application.
6: Make the reprint settings (number of times and interval) in EPSON TMNet WebConfig. For detail, see
tings - Web service settings - Print Settings - Spooler" (page
7: When printing is successful, the spooler's print data and [JobID, Print result = true] are deleted. [JobID, Print
result = true] are stored in the log storage area of this product.
When Print forwarding is enabled
8: Send print data to Secondary printer.
9: When printing fails, the spooler's print data and [JobID, Print result = true] are deleted. [JobID, Print result =
false, Error code = Printer status] are stored in the log storage area of this product.
10:Print with secondary (tertiary) printer. For about settings for forwarding message, see
settings - Print Settings - Spooler" (page
Chapter 4 System Development Using TM-DT Software
[Print result = true] is returned to the application.
[JobID, Print result = true] is returned to the application.
is returned to the application.
[JobID, Print result = false, Error code = Printer status]
is returned to the application.
107).
107).
"Set-
"Settings - Web service
80
4