Tip: If you experience
difficulty with the
toll-free line, call the
Professional Imaging
support line at
(562) 276-1305.
Caution: Using an
improperly shielded
cable—especially a cable
more than 10 feet (3 m)
long—may cause the
printer to malfunction.
Note: USB 2.0 is
required to run the
printer at full speed.
Where To Get Help
Epson provides technical support and information on the installation,
configuration, and operation of professional printing products through the
Epson Preferred Limited Warranty Plan. Dial (888) 377-6611, 6
SM
6
, Pacific Time, Monday through Friday. Days and hours of support are
PM
subject to change without notice.
Before you call, make sure you have your printer serial number and proof of
purchase.
Visit Epson's support website at epson.com/support and select your product
for solutions to common problems. You can download drivers, firmware,
and documentation, get FAQs and troubleshooting advice, or e-mail Epson
with your questions.
Windows System Requirements
To use your printer in either a stand-alone or peer-to-peer network
environment, your system should meet these requirements:
IBM
®
-compatible PC with a Pentium
•
recommended
Microsoft
®
Windows
•
Professional x32 Edition, Windows XP Professional x64 Edition, or
Windows XP
At least 2GB of RAM (4GB or more recommended)
•
At least 50GB of free hard disk space for software and processing files
•
Quad-speed (4×) CD-ROM or DVD drive for installing the printer
•
software
For USB connection: a Windows-compliant USB Hi-Speed 2.0 port
•
and a shielded USB "AB" cable from Series A (computer) to Series B,
(printer), up to 10 feet long
For Ethernet connection: Standard Ethernet 100Base-T/10Base-TX
•
SVGA (800 × 600) or higher resolution
•
11
®
4, 2 GHz or higher processor
®
8, Windows 7, Windows Vista
Introduction | 11
to
AM
®
, WindowsXP