Usb Printer; Network Printer; Customer Display - Epson TM-T88V-DT Technical Reference Manual

USB Printer

Connect the USB printer to a USB connector. For printer settings, see the "Technical Reference Guide" of each
TM printer.
 PC-POS System
Set the driver, etc. according to each system of use. For details, see
128.
Systems that use TM-DT software cannot be used.
Fix the USB cables with wire saddles to prevent detachment.

Network Printer

Network printers are connected to the same network as this product. For printer settings, see the "Technical
Reference Guide" of each TM printer.
 PC-POS System
Set the driver, etc. according to each system of use. For details, see
128.
 Systems that use TM-DT software
Set the device ID, IP address, printer model, and other settings with EPSON TMNet WebConfig. For details,
see "Settings - Web service settings - Printer" on page

Customer Display

Connect the customer display (optional) to a USB connector.
For how to connect the customer display and make dip switch settings, etc., see "DM-D110 Technical Reference
Guide".
 PC-POS System
This product is installed with a customer display COM-USB conversion driver, so it is recognized as a virtual
COM port.
Set the driver, etc. according to each system of use. For details, see
128.
 Systems that use TM-DT software
Set whether or not to use the customer display, communication speed and so on with EPSON TMNet Web-
Config. For details, see "Settings - Web service settings - Customer Display" on page
Fix the USB cables with wire saddles to prevent detachment.
Chapter 2 Printer Functions and Settings
"PC-POS System Development" on page
"PC-POS System Development" on page
102.
"PC-POS System Development" on page
103.
40
2