Settings - Web Service Settings - Customer Display - Epson TM-T88V-DT Technical Reference Manual

Settings - Web service settings - Customer Display

Performs the settings for the customer display controlled by TM-DT Software.
You can set the customer display when you have set [Enable] under [Device control] in the
vice settings - Startup settings" (page 101)
Item
Do not use
Use
Communication  Communication 
settings speed (bps)
Data bit
Parity
Brightness setting
Display test
Apply
Chapter 4 System Development Using TM-DT Software
Description
Do not use a customer display.
Use a customer display.
Set the communication speed.
Set the data bit.
Set the parity.
Set the brightness of the customer display in percentages.
You can set 20%, 40%, 60%, or 100%. The maximum brightness is 100%.
Check if the customer display operates properly.
When [Display test] is clicked, characters appear on the customer display.
Registers the settings to this product.
"Settings - Web ser-
4
103