Installing the Software Driver
MS-DOS 6.x
The MSCDEX (or equivalent) and a device driver for the CD-ROM
drive are supplied with the host adapter. Install both the MSCDEX
(or equivalent) and the device driver in order to use the CD-ROM drive.
Refer to the manual supplied with the host adapter for instructions.
Windows
®
95/NT
The installation under Windows is very easy. Just make sure Windows has
detected your SCSI host adapter. In this case the CD-ROM drive is
automatically detected and the software driver will be installed by the
operating system.
Note:
For questions regarding the installation of the SCSI host adapter, see the
manual supplied with this device.
18
Installing the Software Driver
Operating the Drive
This section describes how to start the drive and eject a disc.
Starting the Drive
1
Turn on the power of your computer.
2
Press the eject button.
The drawer comes out automatically.
Press the eject button.
3
Place a disc in the drawer with its label side up.
Place a disc with
its label side up.
Operating the Drive
19