Table of Contents
Advertisement
Note:
When the drive is set up in vertical position, use the appropriate disc locks
to prevent your disc from falling.
Disc locks
4
Gently push the drawer or press the eject button to close the drawer.
The drive may begin reading the Table of Contents (TOC) data when it
accepts the disc. The busy indicator lights up in amber while the drive
is reading the TOC.
For subsequent drive operations, follow the instructions provided with
the application software you are using.
Note:
The busy indicator stays lit in amber if:
– the disc is not properly placed on the loading tray
– a malfunction occurs.
In either case, eject the disc and place it in the loading tray again making
sure that it sits properly in the tray. If doing this does not solve the
problem and the busy indicator still remains lit in amber, consult your
dealer or qualified service personnel.
Caution: Do not forcibly close the disc drawer. Applying excessive force
may damage the loading mechanism. The tray's mechanism is designed to
operate with a "feather touch".
20
Operating the Drive
Ejecting the Disc
To eject the disc, press the eject button on the front panel. The drawer
comes out automatically.
Press the eject button.
Note:
The eject button does not work if it is disabled by:
- the software you are using
- the PREVENT/ALLOW jumper
Opening the drawer manually in an emergency
You can open the drawer manually when it fails to come out by means of
the eject button or software commands. To do this, follow the procedure
below:
1
Turn off the power of your computer.
2
Insert a pointed object, such as a paper clip, into the emergency eject
hole and push.
Insert a pointed object to
the emergency eject
hole. (Push not
too vehement!)
After removing a disc from the drive unit, consult your dealer or qualified
service personnel.
Approx. 40 mm
Operating the Drive
21
Advertisement
Table of Contents
