Installing The Software Driver; How To Install; Operating The Drive; Starting The Drive - Sony CDU77E User Manual

Installing the Software Driver

The installation diskette enclosed in the package contains two software
items:
Installer
Device driver for MS-DOS/Windows 3.1
Note:
Both Microsoft CD-ROM Extensions (MSCDEX) or equivalent and Sony's
Device Driver are required to run the CDU77E under the MS-DOS and
Windows 3.1 environment.
Therefore, prior to loading the installation diskette, make sure that the
MSCDEX is in the DOS directory of your hard disk drive (C:\DOS).
Although MSCDEX is included in the most up-to-date MS-DOS (ver. 6.2),
you may need to obtain the software from your PC dealer if you do not
have it.
The installer will automatically load MSCDEX via the AUTOEXEC.BAT
file and installs the Device Driver via the CONFIG.SYS file, if MSCDEX
is already in Drive C:\DOS.

How to install

Load the diskette into the floppy disk Drive A, and type:
>A:\setup
and then, press the Enter key.
After installation, the following lines are added to CONFIG.SYS and
AUTOEXEC.BAT files.
in CONFIG.SYS:
Device=C:\DEV\ATAPI_CD.SYS /D:mscd000 /I:0
in AUTOEXEC.BAT:
C:\DOS\MSCDEX.EXE /D:mscd000 /M:12 /V
18 Installing the Software Driver

Operating the Drive

This section describes how to start the drive and eject a disc.

Starting the Drive

1
Turn on the power of your computer.
2
Press the eject button.
The drawer comes out automatically.
Press the eject button.
3
Place a disc in the drawer with its label side up.
Place a disc with
its label side up.
Operating the Drive 19