Step 9: Installation Review
Now we recommend to review the hardware installation process once
more. Please check briefly the following steps:
All connectors have to be connected properly.
Every SCSI device has its unique SCSI ID number.
The last SCSI device at the SCSI bus has proper termination installed
The red edge of the flat cable must be closest to pin number 1 of the
interface card connector.
The following illustration is a sample system configuration of the
CDU625 CD-ROM drive installation with a SCSI card.
5V±5% GND 12V±10%
R GND L
0 1 2
Step 10: Closing the Computer
Replace the cover on the computer, be careful to reinstall all screws that
Now you have completed the hardware installation procedure.