Using Jbod Or A Redundant Raid Mode And Terastation Is On - Buffalo TeraStation 5010 TS5210DN User Manual

Using JBOD or a Redundant RAID Mode and TeraStation Is On

1
The failed drive's error LED will be glowing red. Push its unlock button and swing the lock mechanism out.
Drives without red error LEDs blinking are still on. Do not unplug or remove them.
2
Pull out the drive cartridge and remove it from the TeraStation.
3
Insert the new drive into the empty slot. Slide the drive in with the locking mechanism open.
4
Swing the lock back down until it clicks into place.
5
When the replaced drive is recognized, the error LED will flash.
6
For a redundant RAID mode:
The replaced drive will be rebuilt into the RAID array automatically when auto RAID rebuild is enabled. If not,
rebuild the RAID array manually from "Storage" - "RAID".
178