Buffalo TeraStation 5010 TS5210DN User Manual page 54

7
Select the drive to add to the RAID array.
8
Click Create RAID Array.
9
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
10
Click OK when finished.
Adding a Drive to an Existing RAID Array
You can add a drive to a RAID 1 or RAID 5 array. Drives in JBOD can be added to the RAID array.
Note: RMM can be used to expand an array by one drive per operation. To expand by two or more drives, RMM must
be performed multiple times.
1
In Settings, click Storage.
2
Click to the right of "RAID".
3
Choose a RAID array.
53