Buffalo TeraStation 5010 TS5210DN User Manual page 11

TS5410DN
1
Power Button (
To power on, connect the power cable and wait for 10 seconds, then press the power button. To power off,
press and hold the power button for 3 seconds.
If the TeraStation beeps, pressing this button for a short period will stop the beeping.
2
Power LED
When the TeraStation is on, the LED glows green.
3
Info LED
If there is a status message, the amber info LED will light up. Check the LCD panel to see the status message.
4
Error LED
If there is an error, the red error LED will light up. Check the LCD panel to see the error message.
5
LAN1 LED
When LAN port 1 is connected, this LED glows green. It blinks when the connection is active.
6
LAN2 LED
When LAN port 2 is connected, this LED glows green. It blinks when the connection is active.
7
LAN3 LED
When LAN port 3 is connected, this LED glows blue. It blinks when the connection is active.
8
LCD Panel
This display shows the status of many TeraStation settings. It also displays errors and messages when available.
9
Display Button
Switches between the different display modes. Also, if the TeraStation is beeping, press this button to stop it.
1 2 3 4 5 6
11
)
7
8
9
10
14
15
12
16
13
17
18
22
10
23
21
24
19
20