Buffalo TeraStation 5010 TS5210DN User Manual page 110

4
Configure the desired settings, then click OK.
• You may use the BuffaloNAS.com server as a DNS server, or disable it to use a different DNS server.
• Choose a "BuffaloNAS.com Name" and "BuffaloNAS.com Key" for your WebAccess account. Names and keys
may use 3 to 20 alphanumeric characters, underscores (_), and hyphens (-).
• If "Exclusive Session" is enabled, multiple users cannot be logged in to WebAccess at the same time. Only
the last login will be active.
• Enter a time in minutes (1 to 120, or "Unlimited") before inactive users are logged out of WebAccess.
5
Click OK.
6
Move the WebAccess switch to the
7
Click to the right of "Folder Setup".
8
Select a shared folder to publish.
Notes:
• For best results, create a new dedicated share for WebAccess.
• When accessing shared folders through WebAccess from a remote location, a username and password
may be required for certain operations. For best results, create a user account with permissions on the
WebAccess share before using WebAccess.
9
Under "LAN Protocol Support", select the "WebAccess" checkbox on the "Basic" tab.
10
Click the Option 2 tab and select the desired WebAccess security levels for "WebAccess Permissions", then click
OK.
There are many ways to access WebAccess folders depending on your device.
position to enable WebAccess.
109