Buffalo TeraStation 5010 TS5210DN User Manual page 39

2
Click to the right of "Workgroup/Domain".
3
Click Edit.
4
Select "Active Directory", then click Next.
5
Click Yes.
6
Enter the domain controller information and click Search. The domain controller on the same network will be
detected and required settings will be entered into each box automatically. Or, enter the settings manually.
7
If there is a difference of more than 5 minutes between the TeraStation's clock and the domain controller's
clock, joining the domain or authenticating domain users and groups may fail. For best results, select
"Configure domain controller as an NTP server" if the domain controller can function as the NTP server.
8
Click OK.
38