Table of Contents
Advertisement
Parallel Port EPP
Type*
USB Controller
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.
Choose EPP1.7 (default) or EPP1.9.
EPP1.9 supports hardware
handshake. This setting is
dependent on your EPP device.
*: The above 2 options wonÕt work
unless EPP/ECP function is selected.
Enabled: Enable USB function and
it will occupy one IRQ, usually the
IRQ11.
Disabled (default): Disable USB
function and it will not occupy IRQ.
Choose Disabled when it is not
connect to an USB device.
Award BIOS Setup 37
Advertisement
Table of Contents
