Table of Contents
Advertisement
Video Off Method Choose Blank , DPMS, or V/H
MODEM Use IRQ Assign the IRQ number to the
Doze Mode
Standby Mode
Suspend Mode
HDD power Down Time is adjustable from 1 to 15
IRQx (Wake-Up
Event)
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.
Sync+Blank (default). You can
chose either DPMS or V/H
Sync+Blank when the monitor has
the Green function. You need to
choose Blank when the monitor has
neither the Green function.
modem which is being used so that
the ring signal can wakeup the
system. The default setting is 3
(COM2).
This option sets the CPU speed
down to 33MHz during this mode.
These two options allow you to
choose the mode for the different
timers. The Standby Mode turns off
the VGA monitor, and the Suspend
Mode turns off the CPU and saves
the energy of the system.
minutes. When the set time has
elapsed, the BIOS sends a command
to the HDD to power down, which
turns off the motor.
Set these IRQs individually.
Activity detected from any enabled
IRQ channel (ON) will wake up the
system.
Award BIOS Setup 31
Advertisement
Table of Contents
