Table of Contents
Advertisement
A short description of screen options follows:
IDE HDD Block
Mode
IDE Primary
Master/Slave PIO
IDE Secondary
Master/Slave PIO
On-Chip Primary/
Secondary PCI IDE
PCI Slot IDE 2nd
Channel
Onboard FDD
Controller
Choose Enabled (default) or
Disabled. If your hard disk size is
larger than 540MB, choose Enabled,
and, if you are using the IDE HDD
Auto Detection option, the BIOS
will choose this option
automatically. (Note: Some HDDs
of old models donÕt provide this
feature.)
Choose Auto (default) or Mode 0~4.
The BIOS will detect the HDD Mode
type automatically when you
choose Auto. You need to set to a
lower mode than Auto when your
hard disk becomes unstable.
Enabled (default): Turn on the
onboard IDE function.
Disabled: Turn off the onboard IDE
function.
Enabled (default) : Reserved IRQ15
for secondary IDE device.
Disabled: Release IRQ15 for other
devices.
Choose Enabled (default) or
Disabled. Choose Disabled when
you use an ISA card with FDD
function, or , choose Enabled to use
the onboard FDD connector.
Award BIOS Setup 35
Advertisement
Table of Contents
