How Honeywell Galaxy Terminology Is Used In Security Center - Honeywell Galaxy Dimension series Integration Manual

How Honeywell Galaxy terminology is used in Security
Center
Honeywell Galaxy intrusion detection components are mapped as entity types in Security
Center. The following table lists some Honeywell Galaxy components and terms, and how they
are represented in Security Center.
Honeywell term
Galaxy Dimension
control panel
Group
Zone
Zone function
Output
Full set
Part set
omit zone
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014

How Honeywell Galaxy terminology is used in Security Center

Description
The control panel that is monitored and
controlled by Security Center. Each control
panel can control multiple groups.
A group of zones configured on the control
panel that specify a physical area, such as a
floor of a building. These groups can be
monitored and armed in Security Desk.
Inputs for devices such as glass break detectors,
motion sensors, temperature sensors, etc., that
are connected to the control panel.
The zone's function, such as monitoring
intruders, fire, AC fail, entry, exit, and so on.
The zone function is configured on the control
panel.
Output pin connected to the control panel.
This action arms a whole group.
This action arms the zones in a group that have
the Part attribute enabled (usually the
perimeter inputs of a group).
This option temporarily removes a zone from
the system so it will not generate alarms.
Security Center term
Intrusion detection unit
Intrusion detection area
input
Input function
Output
Master arm
Perimeter arm
bypass input
4