Table of Contents
Advertisement
2
Select an input, and at the bottom of the Peripherals tab, click
A dialog box appears.
3
In the
Name
connected to the panel.
4
(Optional) Type a
the input in Security Center.
(Optional) Type a
5
6
From the
map to the input.
IMPORTANT
control panel. For more information about configuring groups on your control panel, see
"52.10=Group" in the Honeywell Galaxy Dimension Installer Manual.
7
From the
IMPORTANT
panel. For example, inputs can be used to monitor entry, intruders, exit, etc. You need to set
the same input function in Security Center as on the panel. For more information about
configuring an input's function on the control panel, see "Option 52- Program Zones" in the
Honeywell Galaxy Dimension Installer Manual.
8
In the
Input type
configuration on the panel:
Undefined. The input does not have a set type. If you select this option, the input is
considered as a Perimeter input type.
Perimeter. The input is configured to monitor the perimeter of an intrusion detection
area.
Interior. The input is configured to monitor inside the intrusion detection area.
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
field, the name of the input is displayed. This is the name of the zone
Logical ID
for the input. Setting a Logical ID helps you to easily identify
for the input.
Description
Intrusion detection area
The intrusion detection area must be the same group the input is part of on the
Input function
drop-down list, select the input function.
Every intrusion detection area and input has a specific function on the control
field, select one of the following options according to the input's Part set
Configuring the intrusion detection unit
drop-down list, select an intrusion detection area to
Edit the item
(
).
28
Hide quick links:
Advertisement
Table of Contents
