Honeywell Galaxy Dimension series Integration Manual page 25

d Click Next.
5 On the
a Verify the information you entered.
b If everything is correct, click Create, or click
When the role is created, the following message appears: The
6 Click Close.
The Intrusion Manager role appears in your entity browser.
For more information about configuring Intrusion Manager role properties, see "Intrusion
Manager" in the Security Center Administrator Guide. You can access this guide by clicking
in Config Tool.
After you are done:
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Creation summary page, do the following:
"Create the Intrusion detection unit"
Create the Intrusion Manager role
Back to modify your settings.
operation was
on page 21.
successful.
F1
20