Table of Contents
Advertisement
6
In the
Interface type
If you selected
on the panel in
If you selected
panel will connect to.
NOTE
computer. You can find the available COM ports for your computer in the Device Manager
in Windows, under
IMPORTANT
communication settings you configured on the panel in
panel for RS-232 communication"
In the
Account number
7
control panel in
page 15, or
8
In the
Remote user code
The default user code is 543210.
Click Next.
9
10
On the
a
Verify the information you entered.
If everything is correct, click Create, or click
b
When the intrusion detection unit is created, the following message appears: The
was
successful.
11
Click Close.
The intrusion detection unit appears under the Intrusion Manager role in the entity browser.
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
option, select
IP
address, type the
Step 5
of
"Configure the control panel for IP communication"
Serial
port, from the drop-down list, select the communication port the
The COM ports shown in the drop-down list are not necessarily available on your
Ports (COM &
The settings of the COM port on your computer must match the
field, type the account number username you configured on the
Step 3
of
"Configure the control panel for RS-232 communication"
Step 6
of
"Configure the control panel for IP communication"
field, type the username of the Galaxy Dimension control panel.
Creation summary
page, do the following:
IP address
or
Serial port.
IP address
and
Event port
LPT).
on page 15.
to modify your settings.
Back
Create the Intrusion detection unit
number you configured
on page 17.
Step 4
of
"Configure the control
on page 17.
operation
on
22
Hide quick links:
Advertisement
Table of Contents
