Honeywell Galaxy Dimension series Integration Manual page 23

Set the

Setting the access period to
Dimension control panel at any time. For more information, see "56.4.3.1 - Access
Period" in the Honeywell Galaxy Dimension Installer Manual.
Set the access

Setting the
connection with the control panel. For more information, see "56.4.3.2 - Mode" in the
Honeywell Galaxy Dimension Installer Manual.
For the
10
Set this option so the SIA controls sent from the control panel to Security Center are
recognized by the Ethernet module.
For more information about setting the SIA Control option, see "56.4.8 - SIA Control" in
the Honeywell Galaxy Dimension Installer Manual.
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Access period option to
Any Time
Mode to Direct
Mode to Direct access allows Security Center to initiate the remote
option, enter the
SIA Control
Any Time.
allows Security Center to access the Galaxy
Access.
of the computer sending SIA events.
IP address
Preconfiguration checklist
18