Settings; Access Controller; Web Tools; Documentation - TagMaster XT-1 Manual

XT-1/XT Mini Manual

4.1.3 Settings...

All configuration of the reader can be done on the "Settings..." pages. For all settings, it is possible to get
help by clicking on the question mark ( ). Click the "Save Settings" button to activate changed settings.
Click the "Factory Defaults" button to restore all settings on a page to factory defaults.
Information about important settings is available in the following sections.

4.1.4 Access Controller...

The built-in access controller is configured on the "Access Controller..." pages.
See section 6 for more information.

4.1.5 Web Tools...

The "Web Tools..." pages contain tools that are useful during installation and testing.
Read Tag
4.1.5.1
The "Read Tag" page makes it easy to read tags and display tag contents.
Figure 19 Read Tag

4.1.6 Documentation

The Documentation page provides up-to-date reader documentation.

4.1.7 Reboot

The Reboot page makes it easy to reboot the reader.
•
Press the "Reboot" button to initiate a reboot.
•
Wait for the reboot to complete.
13-111 05, 2015-08-14
Page 21 of 32