TagMaster XT-1 Manual page 25

XT-1/XT Mini Manual
AXIS A1001
5.1.1.2
Configure A1001 to use reader protocol Wiegand with "Dual LED" and set the card format to H10302.
GND [READER I/O] -
CL/LOAD N/C
D0/CLK [READER DATA] D0
D1/DATA [READER DATA] D1
S101 - Wiegand format: W37N/H10302
S101
ON
1 8
Tested version: Firmware version 1.30.0
Bewator Entro
5.1.1.3
Configure the Bewator Entro system to use H10302 format.
GND 0V
CL/LOAD N/C
D0/CLK D0/CLK
D1/DATA D1/DATA
S101
S101
ON
1 8
S101
ON
1 8
Tested version: Bewator Entro 6.55.011
Bewator Omnis (with E2V)
5.1.1.4
The Vigilant reader behaves as a RB500 reader in Clock&Data mode.
GND [Conn. G] -
CL/LOAD [Conn. E] A
D0/CLK [Conn. E] B
D1/DATA [Conn. E] C
S101 - Magstripe format: M8N/H10320
S101
ON
1 8
Tested version: Bewator Omnis 6.0.107
Bewator Entro ≥ 6.5:
Wiegand format:
W37N/H10302
Older versions:
Wiegand format:
W37R/H10302
IN1+ [READER I/O] 12V
IN1- [READER I/O] IO5
IN2+ [READER I/O] 12V
IN2- [READER I/O] IO4
S301 - Vigilant pull-ups enabled
S301
ON
1 8
IN1+ N/C
IN1- N/C
IN2+ N/C
IN2- N/C
S301 - Vigilant pull-ups disabled
S301
ON
1 8
IN1+ [Conn. G] +12V
IN1- [Conn. G] G
IN2+ [Conn. G] +12V
IN2- [Conn. E] R
S301 - Vigilant pull-ups enabled
S301
ON
1 8
13-111 05, 2015-08-14
Page 25 of 32