Reader And Tag Placement - TagMaster XT-1 Manual

XT-1/XT Mini Manual

Reader and Tag Placement

Figure 2 shows some typical installations for the XT-1 reader:
A. Single lane parking entrance. The reader is directed to read windshield or headlight tags.
B. Multilane parking entrance. To minimize the risk for cross reads, the readers are mounted above the
cars and the cars are equipped with windshield or headlight tags.
C. Access control (at the gate) and vehicle identification (at the weighbridge). The trucks are equipped
with ISO card tags that are mounted in a holder on the windshield and read from the side.
D. Traffic control. Readers are used to enable a green wave for buses.
Figure 2 XT-1 installations
Figure 3 shows two installations with side-mounted readers.
A. XT Mini is optimal for parking access with moderate read range requirements.
B. A side-mounted XT-1 can be used to cover a wide road.
Figure 3 Side-mounted reader (A: XT Mini, B: XT-1)
A
A
C
13-111 05, 2015-08-14
B
D
B
Page 6 of 32