Built-In Access Controller - TagMaster XT-1 Manual

XT-1/XT Mini Manual

6 Built-in Access Controller

The reader has a built-in access controller that can control a barrier or gate using the reader's relay output.
All accesses can be logged. A presence indicator such as an inductive loop can be connected to input 3.
NO
COM
Vigilant
Reader
IN3+
IN3-
Figure 23 Built-in access controller connection diagram
To use the access controller or log, a microSD card must be inserted into the microSD memory card slot.
Make sure to power off the reader before inserting or removing the microSD card!
The built-in access controller is configured using the web interface as shown in Figure 24.
Figure 24 Built-in access controller web interface (Settings, Users, Log)
Max number of users
Max number of log entries
Relay output
Presence loop
1000
1000
Barrier/Gate
Loop Controller
13-111 05, 2015-08-14
Page 29 of 32