Transportation And Storage - Jetusa CX580 User Manual

Petrol Powered Pressure Washers

Transportation and Storage

Always ensure that the machine is cool enough to touch before transporting or
storing. • Petrol/fuel/gasoline is extremely flammable – keep clear of naked flames or
other ignition sources. • Always transport the machine with the fuel tap and engine ON/OFF switch in the
"OFF" position. • Ensure that the water supply is OFF and disconnected from the machine and that all
pressure has been released and drain the fuel tank before transportation or storage.
Preparing for Transport and Storage
•
Drain the fuel system by allowing the engine to run until it stops.
•
Ensure the fuel tap, engine ON/OFF switch (or key switch, if applicable) are in the "OFF" position.
• Ensure precautions are taken to prevent damage to the surrounding environment in the event that
any oil, fuel, or detergent leaks from the unit.
•
Avoid exposing the equipment to direct sunlight, particularly during transportation.
•
Ensure the equipment is secure and upright during transport.
•
Store the unit in a dry, well-ventilated area and out of the reach of children.
Long Term Storage
Follow the normal procedures for storage, then:
•
Drain the fuel system. It is advised to have the fuel tank as empty as possible before draining.
a. Unscrew (rotate left) the carburettor drain plug. Use a suitable container to catch the draining fuel,
and allow the fuel to drain. Store the drained fuel in a properly sealed container.
b. Re-install (rotate right) the carburettor drain plug and tighten.
•
Remove the spark plug and put 30ml of clean engine oil into the cylinder. Pull the starter rope slowly to
distribute the oil. Re-install the spark plug.
•
Cover the equipment to protect it.
E&OE © 2017 Jet-USA 40