Jetusa CX580 User Manual page 10

Petrol Powered Pressure Washers
1. Insert a wheel axle (A) through each wheel (B).
2. Line up the hole (C) in the axle with the hole (E) in the frame axle tube (D), then push the axle into the
tube so holes (C and E) are aligned.
3. Insert a "R" clip (F) through the hole so the axle is secured.
C
B
F
E
D
A
The machine is now basically assembled. Refer to Pumps, Hoses and Fittings.
E&OE © 2017 Jet-USA 10