Non-Sealed; Hoses And Fittings - Jetusa CX580 User Manual

Petrol Powered Pressure Washers

Non-Sealed

The pumps are manufactured in a way that requires normal pump maintenance. The pumps are usually oil-
filled during production, require a breather cap, pump oil changes and have an oil sight glass and/or dipstick,
oil drain and oil filler.
4
6
No. Name
1 Pump Inlet
2 Pump Outlet
3 Detergent Port
4 Oil Filler / Breather Cap

Hoses and Fittings

The machine comes with necessary hoses and fittings. The length, number of hoses and nozzles or
accessories may vary depending on model. Some parts, such as the "turbo head" may come pre-assembled.
It is recommended to use plumbers Teflon tape (not supplied) on all threaded
hose connections. To apply the tape, wrap it around the male thread of the
fitting several times – 5 wraps is generally sufficient. When wrapping, rotate the tape to
the right (clockwise) around the thread so it does not get unravelled when screwing the
connection in. • The thread type on some connectors may vary slightly – always check
the compatibility of the connectors before applying plumbers tape and making the final
connection. • Always tighten connections using suitable spanners (where applicable)
and ensure that the connections are secure.
The possible fittings are shown below. Not all models will come with all fittings.
Type B
Type A
•
Type A – Used to connect an extension hose to the end of the lance.
•
Type B – Used to connect an extension hose to the end of the standard hose.
•
Type C – Used to connect the drain cleaning fitting to the end of a hose.
•
Type D – Drain cleaning fitting – connects to a Type C fitting.
E&OE
7
7
No. Name
5 Oil Level Sight Glass
6 Oil Drain Plug
Output Pressure Valve – limited adjustment
7
Type C Type D
© 2017 Jet-USA
3
2
1
5
21