Jetusa CX580 User Manual page 15

Petrol Powered Pressure Washers
Hose Routing – CX660 Only
The pump outlet hose to the hose reel must be routed as described below. This is to prevent it being
exposed to excessive engine exhaust heat that may cause damage to the hose.
1. During assembly, ensure that the hose reel is mounted with the handle on the right-hand side and the
pump hose on the left-side of the machine (when standing behind the machine and looking forward).
2. Route the pump-to-reel hose UNDER the engine, then connect it to the pump outlet.
3. Secure the hose with cable ties to the machine frame, then trim off excess cable-tie.
Tip: For a video tutorial regarding pump outlet hose routing, see
https://youtu.be/Cc8e8Y-mYwM
The machine is now basically assembled. Refer to
E&OE
Route pump
outlet hose
Connect
UNDER
hose to
engine on
pump outlet
left-hand side
or scan the "QR code".
Pumps, Hoses and
© 2017 Jet-USA
Cable-
tie hose
to frame
Fittings.
15