Petrol Powered Pressure Washers
1. Attach the detergent bottle bracket (A), with the hook facing up, to the front right of the machine frame
and secure using 2 M5x35 screws (B), 4 washers (C) and 2 nuts (D). Tighten (rotate right) the fasteners
using a suitable screwdriver and spanner. Slide the detergent bottle holder (E) on to the detergent bottle
bracket.
A
2. Attach the lance bracket (F) to the front left of the machine frame and secure using 2 M5x30 screws (G),
4 washers (C) and 2 nuts (D). Tighten (rotate right) the fasteners using a suitable screwdriver and
spanner.
F
3. Attach the hose bracket (H) to the front left side of the machine frame and secure using 2 M5x30 screws
(G), 4 washers (C) and 2 nuts (D). Tighten (rotate right) the fasteners using a suitable screwdriver and
spanner.
H
4. Slide the detergent bottle (I) into the holder.
The machine is now basically assembled. Refer to
Fittings
for hose assembly information.
E&OE
D
B
C
D
C
Pumps, Hoses and
© 2017 Jet-USA
E
G
I
G
D
C
17