Using Connectors - Jetusa CX580 User Manual

Petrol Powered Pressure Washers
The following image shows the possible combinations of hoses, fittings and nozzles.
Item Description
A Standard Hose
B Lance
C Lance Extension
D Nozzle
E "Turbo Head"
Turbo-Head Assembly
If the "turbo head" and turbo-head is not assembled, 1) wrap the threaded part of the turbo-head adaptor
fitting with plumbers Teflon tape (not supplied), then 2) screw the adaptor into the turbo-head, then 3) use an
Allen key through the adaptor to tighten it firmly to the turbo-head.

Using Connectors

The connector used can be any of 3 types – screw type fittings as previously described, threaded collar type
fittings and "quick-connect types". The type of connectors supplied may vary.
Threaded Collar Type Connectors
1. Ensure the O-ring is correctly fitted and undamaged and that the
connectors are clean.
2. Insert the male connector into the female and when the threads engage,
firmly tighten (rotate right / clockwise) the collar by hand.
E&OE
Item
1
© 2017 Jet-USA
Description
F Extension Hose
G Type B Fitting
H Type A Fitting
I Type C Fitting
J Type D "Drain Cleaner" Fitting
2
3
22