Table of Contents
Advertisement
You can change the timeframe for upgrading the firmware according to the procedure
below. Be noted that this scheduled upgrading of the firmware accompanies restarting
of the Gateway, which may interrupt your use of services via an external network.
1.
Connect the user PC to the Gateway.
2.
Temporarily terminate firewall and/or antivirus software if running on the user PC.
3.
Type the URL of the "EMS Gateway" setup page ("https://192.168.24.1/" by default)
in the address bar of your browser and hit the Enter key. A log-in dialog opens.
4.
Type your user ID ("user" by default) and password ("user" by default) in applicable
fields, and click OK button. The top page of the setup page opens.
5.
Click Administration from menu to drop down the list and click Firmware Upgrade
in the list.
6.
The top page navigates to the "Firmware Upgrade" page shown below. Ensure
that enable check box in "Auto Reboot" field of "Auto Reboot" section is checked.
7.
In "Reboot Time" field of "Auto Reboot" section, click the down arrow to drop down
the time of day list. In this list, click to select a time of day value that matches your
desired hour of day for upgrading the firmware.
8.
Click Set button in "Auto Reboot" section.
9.
Close the browser to log out from the "EMS Gateway" setup page. Resume firewall
and/or antivirus software if terminated in Step 2.
- 28 -
Advertisement
Table of Contents
