Hitachi EM-G21 User Manual page 10

SAFETY INSTRUCTIONS (Continued)
INSTRUCTIONS for Moving, Cleaning, and Maintenance
Clean the power cord plug periodically.
Unplug the power cord of the AC adapter from the outlet and remove dust
between the power cord plug and the outlet periodically (about once per six
months). Failure to follow these instructions may result in fire or electric shock.
Disconnect power and all cables before moving the Gateway.
Unplug the power cord of the AC adapter from the outlet and disconnect all
cables connected between the Gateway and the peripheral devices before
moving the Gateway. Failure to follow these instructions may result in fire or
electric shock
Disconnect power before maintenance.
Unplug the power cord of the AC adapter from the outlet before maintenance.
Failure to follow these instructions may result in electric shock or other injury.
Do not disassemble or modify the Gateway.
Never disassemble or modify the Gateway. Failure to follow these instructions
may result in fire or electric shock.
 When unplugging and plugging the power cord of the AC adapter attached to the
Gateway, wait 10 seconds or longer between unplugging and plugging.
 When the exterior of the Gateway is dirty, wipe the exterior with a dry, soft cloth. If
the dirt in areas other than device connecting cable ports is heavy, wipe the dirt
using a well-wrung-out soft cloth moistened with neutral detergent diluted with
water, and then wipe with a new, dry, soft cloth. Never let device connecting cable
ports get wet. Never use a dry or pre-moistened wipe, alcohol, benzine, thinner, or
other organic solvent so as not to cause the exterior shape or color to change.
 Do not apply insecticide spray or other volatile spray on the exterior of the Gateway.
Do not contact a rubber, a vinyl, or an adhesive tape on the exterior for a long time.
Such actions may cause the exterior shape or color to change.
 Do not drop the Gateway or bump the Gateway on any other objects while moving
the Gateway. Dropping or bumping the Gateway may result in damage to the
equipment or a malfunction.
 To avoid equipment damage while moving the Gateway, use the packing carton
and packing materials supplied with the Gateway.
WARNING
NOTICE
- X -