Hitachi EM-G21 User Manual page 4

SAFETY INSTRUCTIONS (Continued)
INSTRUCTIONS for Installation (Continued)
WARNING
Keep away from automatic controls.
Do not install the Gateway near automatic control equipment such as automatic
doors or fire alarms. The radio waves of the Gateway may affect the operation of
the automatic control equipment and may result in the malfunction of the
equipment.
Do not install the Gateway in the following locations:
 An environment that is subject to dust, salinity, or electro-conductive dust;
 An environment filled with vaporized chemicals, solid or liquid chemicals,
corrosive or toxic gases or ammonia;
 An environment subject to oil splashes or steam;
 An environment subject to vibrations or strong shocks
Installation in these environments may result in fire, electric shock, for machine
failure.
The Gateway is designed for home use. The Gateway should not be installed for
use in other environments including medical systems, a computer network
supporting social infrastructures, an exhaust system, or any systems that are
subject to installation I accordance with building laws or fire protection laws. The
use of the Gateway in environments other than home use may result in death,
severe injury or property damage.
Do not install the Gateway near a medical device or in a hospital. The radio
waves from the Gateway may interfere with medical devices and cause the
devices to malfunction which may result in death, severe injury or property
damage.
Do not install the Gateway where a pacemaker is being used. The radio waves
from the Gateway may interfere with a pacemaker and case the pacemaker to
mulfunction which may result in death, severe injury.
Always install the Gateway right side up. Do not lay the Gateway on its side or
place it upside down. Do not place any objects on top of the Gateway. Failure to
follow these instructions may result in a fire.
Keep the Gateway out of the reach of children and pets. If a child plays with the
Gateway or a pet bites a cable, fire or an electric shock may result.
Do not place the AC adapter in a poorly ventilated area. Placement of the AC
adapter in a poorly ventilated area may cause the AC adapter to become
overheated and may result in fire or damage to the AC adapter.
Make sure that the plug of the AC adapter is inserted completely in the outlet.
Dust will collect in any gap between the plug and the outlet and may cause a fire.
- IV -