Hitachi EM-G21 User Manual page 3

SAFETY INSTRUCTIONS (Continued)
INSTRUCTIONS for Installation
Hazardous voltage.
Install and connect the Gateway in accordance with the instructions in this
manual. Failure to follow the instructions in the manual may result in electric
shock, damage to a connected device or damage to the network facility.
Keep away from fire.
Do not place the Gateway, AC Adaptor, power cord or cables near fire or a heat
source. Failure to follow this instruction may cause the enclosure coating or
cable coating to melt. This may result in fire or electric shock.
Keep away from direct sunlight or heat.
Do not install or place the Gateway in direct sunlight or in a location where the
temperature exceeds 40°C. Failure to follow these instruction may result in the
internal temperature of the device to rise or the deterioration of the plastic
material and may result in a fire.
Keep away from the cold.
Do not install the Gateway in a location that is subject to temperatures less than
0° C. This may cause condensation inside the equipment or cables and may
result in fire, electric shock or failure of the Gateway.
Keep away from sudden temperature change.
Do not install the Gateway in a location that is subject to sudden changes in
temperature. This may cause condensation inside the equipment or cables and
may result in fire, electric shock or failure of the Gateway.
Keep away from high humidity.
Do not install the Gateway in a location subject to humidity exceeding 80%.
Placement of the Gateway in a location with high humidity may result in fire,
electric shock or failure of the Gateway.
Follow rules below. Otherwise, fire or an electric shock due to a short circuit may
result.
 Do not expose the Gateway, the AC adapter, the power cord or cables to
water or other liquids. Exposure of the Gateway, AC adapter, power cord or
cables to water or other liquids may cause a short circuit of the system and
may result in a fire or electric shock.
 Do not use the Gateway, AC adapter, power cord or cables if they are wet or
have been exposed to water or other liquids.
 Do not install or use the Gateway in a bathroom or a shower room.
 Do not place water or liquids near the Gateway, AC adapter, power cord or
connecting cables.
WARNING
- III -